136 CHAPTER 4: ADDING VCX TELEPHONES AND ATTENDANT CONSOLES
To add or edit the emergency defaults:
1In the USERS menu, click Emergency Services.
The Emergency Defaults and Emergency Services page appears. See
Figure 45.
2In the Gateway IP Address field, enter the IP address of a system-wide
emergency gateway.
3In the Emergency Callback Phone field, enter the phone number of the
contact person responsible for emergency situations within the
organization (for example, a security guard).
4Click Save.
The Emergency Default is applied to the entire organization.
Deleting ERLs To d ele te an E RL :
1In the USERS menu, click Emergency Services.
The Emergency Defaults and Emergency Services page appears.
2Enter a check mark in the check box preceding the ERL you want to
delete.
3Click Delete Selected.
A pop-up window appears prompting you to confirm the ERL delete
action.
4Click OK.
The Emergency Defaults and Emergency Services page refreshes.
Editing the IP Address
Range of an ERL
To edit an IP address range for the ERL.
CAUTION: If Emergency service settings or emergency lines are changed,
(for example, the gateway IP address or emergency digits) they will not
take effect until the telephones are power cycled. A simple logout/login
of the telephone is not adequate.
1In the USERS menu, click Emergency Services.
The Emergency Defaults and Emergency Services page appears.
2In the Location Settings column, click IP Ranges for the ERL you want to
edit.
The IP Ranges page appears.