134 CHAPTER 4: ADDING VCX TELEPHONES AND ATTENDANT CONSOLES
aClick Emergency Services to return to the ERL configuration page.
bFrom the Location Settings column, click Emergency Numbers for the
ERL you want to configure.
The Emergency Numbers page appears.
cClick Add Emergency Number.
The Add Emergency Number page appears.
dIn the Emergency Number field, enter an emergency number that will
signal the gateway to treat it as an emergency number when dialed
(for example, 911.
eClick Save.
The Emergency Numbers page refreshes showing the new emergency
number.
fIf you have more emergency numbers to add, repeat steps b through
e.
8Configure the Emergency Gateway IP for the ERL.
Configuring the emergency gateway IP specifies the address of the
gateway used to reach an emergency service provider if the call processor
is unavailable. You can configure multiple gateways for a redundant
configuration.
aClick Emergency Services to return to the ERL configuration page.
bFrom the Location Settings column, click Emergency Gateway IP for
the ERL you want to configure.
The Emergency Gateway IP Addresses page appears.
cClick Add Gateway IP.
The Add Gateway IP page appears.
dIn the Gateway IP Address field, enter the IP address of the gateway to
which you want emergency calls routed for the telephones within the
ERL.
eClick Save.
The Emergency Gateway IP Addresses page refreshes showing the
emergency gateway.
fTo configure additional emergency gateways for the same ERL, repeat
c through e.
9Configure the Emergency Lines for the ERL.