Configuring Emergency Services 137
3In the Network IP heading, click the IP address you want to edit.
The Edit IP Range page appears.
4In the IP Address field, enter the IP network address that identifies the
range addresses you want to include in this ERL.
5In the Subnet Mask field, enter the subnet mask for this IP address range.
6Click Save.
The IP Ranges page refreshes showing the new IP address range.
Deleting IP Addresses
from an ERL
To delete an IP address range from an ERL.
1In the USERS menu, click Emergency Services.
The Emergency Defaults and Emergency Services page appears.
2In the Location Settings column, click IP Ranges for the ERL you want to
edit.
The IP Ranges page appears.
3Enter a check mark in the check box preceding the IP address you want to
delete.
4Click Delete Selected.
A pop-up window appears prompting you to confirm the IP address
delete action.
5Click OK.
The IP Ranges page refreshes verifying the IP address(es) were deleted.
Editing Emergency
Numbers
To edit an Emergency Number for the ERL.
CAUTION: If Emergency service settings or emergency lines are changed,
(for example, the gateway IP address or emergency digits) they will not
take effect until the telephones are power cycled. A simple logout/login
of the telephone is not adequate.
1In the USERS menu, click Emergency Services.
The Emergency Defaults and Emergency Services page appears.
2From the Location Settings column, click Emergency Numbers for the ERL
you want to configure.
The Emergency Numbers page appears.