3Com V7000 - page 303

Managing Routes 303
Figure 114 Route - End Points - Unassigned OutDial Patterns Page
5You can assign one OutDial pattern or multiple OutDial patterns.
■To assign one OutDial pattern, click Assign in the Action column for
the OutDial pattern you want to assign.
■To assign multiple OutDial patterns, enter a check mark in the check
box preceding each OutDial pattern you want to add, then click
Assign Selected.
A confirmation window appears prompting you to verify the assignment
action.
6Click OK.
The Route - End Point - Assigned OutDial Patterns page refreshes.
showing the assigned OutDial pattern. See Figure 115.
Figure 115 Route - End Point - Assigned OutDial Patterns Page
Unassigning an
OutDial Pattern for a
Route
To unassign an OutDial pattern for an end point associated with a route:
1Click Routes.
The Routes page appears. See Figure 109.