Managing Route Plans 305
The source-based input parameters allow the server to vary the
translation or route mapping based on the source. For example,
translation of the same number could be different based on which
gatekeeper the request came from:
The same logic applies for destination number to route mapping. For
example, if the request comes from gatekeeper 1 then the route would
be different than if the request comes from gatekeeper 2.
Adding a Route Plan This section describes how to configure a route plan using the Route Plan
menu option. You can also create a route using the Route Plan Wizard.
See Using the Route Plan Wizard for more information.
To add a route plan:
1From the Central Manager, select the VCX server on which you want to
add a route plan (see Accessing a VCX Site through the Central
Manager).
The USERS interface is enabled and the Users page appears.
2Click DIRECTORY.
The DIRECTORY interface page appears. See Figure 103.
3Click Route Plans.
The Route Plans page appears by default. Figure 116 shows the page
with four previously configured route plans.
Table32 Number Translation
Direct Requestor Destination Number Translation
Gatekeeper 1 312-555-1212 708-555-1212
Gatekeeper 2 312-555-1212 630-555-1212