3Com V7000 Managing Routes

Managing Routes 297
Deleting OutDial
Patterns from
Existing End Points
To delete OutDial patterns from existing end points:
1Click End Points.
The End Points page appears. See Figure 104.
2In the Actions column for an end point, click the OutDial Patterns.
The End Point - Assigned OutDial Patterns page appears. See Figure 108.
3You can delete one OutDial pattern or multiple OutDial patterns.
■To delete one OutDial pattern, click Unassign in the Actions column
for the OutDial pattern you want to delete.
■To delete multiple OutDial patterns, enter a check mark in the check
box preceding each OutDial pattern you want to delete, then click
Unassign Selected.
A confirmation window appears prompting you to verify the delete
action.
4Click OK.
The End Point - Assigned OutDial Patterns page refreshes.
Managing Routes This section provides the following information on route management:
■How to add, edit, or delete a route
■How to edit end points assigned to a route
■How to edit route properties such as the route name and sort order
Adding Routes To add a route:
1From the Central Manager, select the VCX server on which you want to
add a route (see Accessing a VCX Site through the Central Manager).
The USERS interface is enabled and the Users page appears.
2Click DIRECTORY.
The DIRECTORY interface page appears. See Figure 103.
3Click Routes.
The Routes page appears. Figure 109 shows the Routes page with five
routes configured.