Mapping Bridged Extensions 185
Administration web interface. If a bridged extension is mapped through
the Administration interface, the Button Mappings tab in the VCX User
interface for the secondary phone shows the primary extension mapped
to a button. However, the secondary user can change the button
mapping unless you lock it (see Dynamic Button Mapping Overview).
Bridging is not supported on Basic phones (Models 2101 or 3101).
Mapping a Bridged
Extension on a
Secondary Phone
To map a primary extension to a button on a secondary phone:
1Access the office location of the user whose phone you want to configure
as a secondary phone (see Accessing a VCX Site through the Central
Manager).
The USERS interface is enabled and the Users page appears. This page
lists all the users configured on this server. The menu options for the
USERS interface appear on the left side of the window.
2Locate the user assigned to the phone you want to designate as the
secondary (the phone that will receive calls to the primary phone).
Alternatively, you can click Phones in the USERS interface menu and go to
step 4.
3In the Phones column, click the Phones link for the secondary phone.
The User - Assigned Phones page appears for the selected user. See
Figure 51.
4In the Actions column, click Button Mappings.
The Button Mappings page appears.
5In the Select the phone type drop-down list box, select the phone model
used by the secondary phone.
6Click Select.
A graphic appears showing the button mappings for the selected phone.
7Click the Feature Type drop-down list for the button you want to map
and select Bridged Line.
8In the Number/Index field, enter the extension of the primary phone.
9Click Save.