3Com V7000 Table20 Business and Basic Telephone LUI Menu Items (continued)

154 CHAPTER 5: CONFIGURING TELEPHONE COMMUNICATION SETTINGS

6 VCX Config

Alt Dnld Servr – Lets you specify the IP address of the

secondary Network Call Processor. See the description for 5 Set

NCP IP for information.

Set VLAN Config – Used to enable or disable VLAN

configuration.

■VLAN Enable – 1

You are prompted to enter the VLAN ID. A valid VLAN ID is in

the range of 0 through 4095. Press the pound key (#) to store

it in memory.

■VLAN Disable - 0

7 Reserved Reserved for future use.

8 Test LED & LCD Turns on all LEDs for 5 seconds, then fills every pixel on the

display panel for 5 seconds.

9 Test – Buttons Puts the telephone in the button test state. Press any telephone

button to see a description of the button’s function. To return to

the main menu, you must press the menu button twice:

■On the 3Com 3102 Business Telephone:

■On an 3Com 2102 or 2102-IR Business Telephone:

■On an 3Com 3101 or 3101SP Basic Telephone:

■On an 3Com 2101 Basic Telephone:

0 EEPROM-Default

Restores the phone to default settings by clearing these

configured settings:

IP Information — My IP, Subnet Mask, Gateway IP, NCP-IP, and

the Alt Download Server IP return to 255.255.255.255.

NCP MAC address — The NCP MAC address returns to

ff:ff:ff:ff:ff:ff.

SIP Parameters — All SIP specific parameters will be set to

default 0xffff (data parameters) or 255.255.255.255 for IP

addresses.

NOTE: If you select this option you are prompted to verify your

action before the system clears the EEPROM.

AB1 Set NCP

MAC

This option is not used in VCX networks.

Table20 Business and Basic Telephone LUI Menu Items (continued)

Menu Option Description