248 CHAPTER 8: CONFIGURING GROUPS
bridged to a primary extension and therefore have access to the primary
extension’s voice mailbox (see Adding Bridge Permission for an
Extension).
For example, extension 641001 is a member of two hunt groups, Service
and Support, and is configured to receive voicemail notification when a
caller leaves voicemail for either group. Extension 641001 is also bridged
to the primary extension 641005. When a user presses the Message
button on extension 641001, the telephone display panel shows the
following information:
■The number of messages in the personal mailbox for extension
641001.
■The number of messages in the mailbox for the hunt group Service.
■The number of messages in the mailbox for the hunt group Support.
■The number of messages in the mailbox for primary bridged extension
641005.
Note that the display panel can list 26 mailbox status entries. The display
panel always lists the mailbox for phone’s extension. Therefore the display
panel can list a maximum of 25 status entries for group mailboxes and
bridged extension mailboxes. Once the maximum is reached, additional
group or bridged extension mailboxes will not be listed.
To change the message waiting indicator of a hunt group or attendant
member:
1From the Central Manager, select a VCX server (see Accessing a VCX Site
through the Central Manager).
The USERS interface is enabled and the Users page appears. This page
lists all the users configured on this server. The menu options for the
USERS interface appear on the left side of the window.
2Click Hunt Groups.
The Hunt Groups page appears.
3Locate the group containing the member whose MWI status you want to
modify and click Status in the Actions column.
The Hunt Group - Status page appears. See Figure 88.
4Locate the member whose MWI status you want to modify.
5In the MWI column, check the MWI status that you want to assign to this
hunt group member: