88 CHAPTER 4: ADDING VCX TELEPHONES AND ATTENDANT CONSOLES
Local Time Zone Specifies the time zone of where the server is located.
Field options preceded by [x} indicate time zones that
support Daylight Savings Time adjustments.
Observe Daylight Savings Check this box if the time zone you selected observes
Daylight Savings Time.
Music On Hold Number Enter the number the call processor dials to access Music
on Hold (MOH) when a user puts a caller on hold. The
caller hears the audio file (music or a recording)
associated with the MOH number.
MOH is set up through your messaging application, for
example, 3Com IP Messaging.
If your system implements an IP Messaging client/server
configuration, the server and each client must have
distinct MOH access numbers. For example, an IP
Messaging server could have 3 client systems. In this
case, you could configure 1001 as the MOH number for
the server, 2001 as the MOH number for the first client,
3001 as the MOH number for the second client, and so
on. The number you enter depends on whether you
want this phone to be associated with the server or one
of the clients.
Voice Mail Number Enter the number the call processor dials to access voice
mail messages. This number is dialed automatically when
a user presses the telephone’s MSG button.
The voice mail access number (sometimes referred to a
the pilot number) is configured through your messaging
application, for example, 3Com IP Messaging.
If your system implements an IP Messaging client/server
configuration, the server and each client must have
distinct voice mail access numbers. For example, an IP
Messaging server could have 3 client systems. In this
case, you could configure 1000 as the voice mail access
number for the server, 2000 as the voice mail access
number for the first client, 3000 as the voice mail access
number for the second client, and so on. The number
you enter depends on whether you want this phone to
be associated with the server or one of the clients.
Number Of Lines Specifies the number of lines available on a phone. The
default is 3 lines; the range is 1 to 12 lines. Note that the
number of lines available depends on the phone model
and how buttons on the phone are mapped (see
Creating a Button Mapping Template). You can use the
Number Of Lines field to reduce the number of lines that
can be mapped on a phone.
Table12 Add Phone Profile Field Descriptions (continued)
Field Description