System Operations

Caller Input is the touch-tone digits input by the last or current caller serviced on this channel.

Dialed Digits is the digits dialed on this channel by FAX Attendant to service the last or current caller.

Changing the Refresh Rate

The refresh rate determines how frequently the the system monitor is automatically updated.

By default, the System Monitor refreshes every five seconds. To change the refresh rate, follow these steps:

1.Press F8 (CHG-KEYS) to activate the alternate keys.

2.Press F1 (CHG-RATE).

The Change Refresh Rate window opens.

3.Enter a new refresh rate from 1 to 30 seconds.

4.Press F3 (SAVE) to activate the new refresh rate.

Changing the State of Voice Channels

After recovering from errors, you may need to place voice channels back in service. For testing, you may wish to place voice channels manually out of service. To change the state of a voice channel, follow these steps:

1.At the Configuration Management menu, move the cursor to Voice Equipment and press Enter .

The Voice Equipment window appears.

2.Press the F8 (CHG-KEYS) function key.

3.Press the F2 (CHGSTATE) function key.

A window opens requesting the identification of the equipment whose state is to be changed and the new state it is to assume.

4.Press the F2 (CHOICES) function key.

A menu of choices is displayed.

5.Select either INSERV (in service) or MANOOS (manual out of service) from the menu and press Enter .

The selection is entered in the new state field.

6.Press Enter to move to the Equipment field.

7.Press the F2 (CHOICES) function key.

A menu of choices is displayed.

8.Select Channel from the menu and press Enter .

5-11

Page 131
Image 131
AT&T 2.1.1 manual Changing the State of Voice Channels, Changing the Refresh Rate