System

109 (VROP_GSEMA), MAJOR

Cannot Get VROPQ Semaphore To Lock It

An administrative command could not access a control semaphore. The failure of the command is not serious, but the failure indicates major interprocess communication failures in the system are likely to follow soon.

Try stopping the Voice Power System and then restarting it. If this is unsuccessful, a reboot of the processor will correct the problem.

110 (VROP_LSEMA), MAJOR

Cannot Lock VROPQ Semaphore But It Should Be Available

An administrative command was unable to lock a semaphore that was allocated to it. The failure of the command is not serious, but the failure indicates major interprocess communication failures in the system are likely to follow soon.

Try stopping the Voice Power System and then restarting it. If this is unsuccessful, a reboot of the processor will correct the problem.

Transaction State Machine (TSM) Process

401 (TSM_RCV), CRITICAL

TSM: Cannot Receive Msg: ret = <integer>, errno = <integer>

TSM failed to receive a message from another process. The value of the errno indicates the reason for the error.

Contact your Field Service Representative for assistance.

402 (TSM_SND), CRITICAL

TSM: Cannot Send Msg to <integer>: ret = <integer> errno = <integer> mcont = <integer>

TSM failed to send a message to another process. The value of the errno indicates the reason for the error.

Contact your Field Service Representative for assistance.

403 (TSM_ASS), MAJOR

TSM: Cannot get script name for channel <channel>: ret = <integer>

TSM was unable to find the specified script corresponding to a channel.

Return to the Configuration Screen to check that a service is assigned to the channel.

B-6

Page 182
Image 182
AT&T 2.1.1 manual Transaction State Machine TSM Process