Implementing FAX Attendant

3.Move the cursor to the Application field where AUDIX Voice Power is listed and press the space bar to blank out the entry.

NOTE:

This removes all the AUDIX Voice Power data and all the subscriber’s mail messages (voice and fax).

4.Press F3 (SAVE). A window confirms that the changes have been made.

5.Press Enter to continue.

Deleting a Subscriber’s Profile from the System

From time to time, you may need to remove a subscriber from AUDIX Voice Power/FAX Attendant and the system completely. For example, if a subscriber leaves the company, you should delete that individual’s profile and AUDIX Voice Power/FAX Attendant privileges promptly.

The following procedure will remove the subscriber and the subscriber’s profile, including the extension label, from the Extension Directory.

NOTE:

Be sure to mark the deletion on Forms DX, DA, and DF from the AT&T AUDIX Voice PowerTM/FAX Attendant SystemTM Planning and Implementation document.

1.From the IS-III Main Menu, move the cursor to Extension Directory and press Enter . The Extension Directory Screen appears.

2.Enter the extension number and press F1 (DISPLAY).

3.With the cursor in any field, press F2 (DELETE). A display appears, asking you to confirm your deletion. If you want to delete, enter Y (yes) and press F3 (SAVE).

NOTE:

The subscriber and the subscriber’s profile, including the extension label and the subscriber’s mail (voice and fax) are removed from the Extension Directory.

4.Press Enter to continue.

The Extension Directory screen appears.

Displaying the Subscriber Database

You can list the current subscriber database on your screen to assist in administering the system. Whenever you add a subscriber, remove a subscriber, or change subscriber information, you can display the new subscriber list to verify the changes. To display the subscriber database, perform the following steps:

3-31

Page 65
Image 65
AT&T 2.1.1 manual Deleting a Subscriber’s Profile from the System, Displaying the Subscriber Database