Fax Response Administration

Touch-Tone Gate Prompt General

Administration

The Touch-Tone Gate prompt is described in the section Fax Response Parameters in Chapter 3 of the AT&T AUDIX Voice PowerTM/FAX Attendant System PlanningTM and Implementation document.

The FAX Attendant provides the following system Touch-Tone Gate prompt:

If you have a touch-tone phone, press 1 now. If you do not have a touch-tone phone, please wait and you will be transferred to an operator.

If you wish to customize this message, you may do so by following the procedures in this section. In addition to prompting the caller for a touch-tone response, you may also wish to identify your business to callers in the custom message.

NOTE:

When you customize a message, be sure to include a prompt telling the user to "Press 1 now."

To administer a custom Touch-Tone Gate prompt, perform the following steps:

1.At the Fax Response Prompts Administration menu, press 1 .

FAX Attendant presents the Fax Response Touch-Tone Gate Prompt Administration menu.

1

0

*#

*H

*R

Record custom Touch-Tone Gate Prompt Listen to custom Touch-Tone Gate Prompt Select between system or custom Touch-Tone Gate Prompt

Replay the Current Choices Return to Fax Mail Activity Menu

Listening to the Custom Touch-Tone

Gate Prompt

1.See step 1 in the Touch-Tone Gate Prompt General Administration section above.

2.To listen to the custom Touch-Tone Gate prompt, press 0 at the Fax Response Touch-Tone Gate Prompt Administration menu.

Recording a Custom Touch-Tone Gate

Prompt

To record a custom Touch-Tone Gate prompt, follow these steps:

1.See step 1 in the Touch-Tone Gate Prompt General Administration section above.

4-20

Page 102
Image 102
AT&T 2.1.1 manual Touch-Tone Gate Prompt General Administration, Listening to the Custom Touch-Tone Gate Prompt