AT&T 2.1.1 manual Updating Service Administrator Registration, Outcalling Administration

Implementing FAX Attendant

Updating Service Administrator Registration

To update Service Administrator information, use the preceding procedure. The new information will replace the old information.

NOTE:

Be sure to update Form G from the AT&T AUDIX Voice PowerTM/FAX Attendant SystemTM Planning and Implementation document with the new information.

Outcalling Administration

Parameters that control Outcalling must be set during initial implementation. They are generally not changed. The information is collected on Form H from the AT&T AUDIX Voice PowerTM/FAX Attendant SystemTM Planning and Implementation document. To set the outcalling parameters, follow these steps:

1.Get your updated Form H from the AT&T AUDIX Voice PowerTM/FAX Attendant SystemTM Planning and Implementation document.

2.At the AUDIX Voice Power/FAX Attendant menu, move the cursor to

Outcalling Administration and press Enter .

—The Outcalling Administration form appears.

Outcalling Administration

Is outcalling active?: ___

Start Time: ___:___ ___

End Time: ___:___ ___

Retry Interval: ___ min

Initial Delay: ___ min

Maximum Number of Attempts: ___

Maximum Simultaneous Ports: ___

Maximum Number of Digits: ___

HELP

CHOICES

SAVE

PREV-FRM

NEXT-FRM

CANCEL

CHG-KEYS

FRM-MGMT CHG-KEYS

Figure 3-25. Outcalling Administration Form

3-34