Troubleshooting

Trouble Indication

Messages cannot be left because mailboxes are full.

System is not performing call transfers properly.

Caller hears a ring, but receives no answer.

User Response

Message Space Usage reports for both Voice Management and Fax Management should be performed regularly. Check for subscribers who are approaching or exceeding the message space limit. Have subscribers delete old messages regularly. Also, make sure the Message Drop service is checked and cleared on a regular basis.

Check to see if the user is transferring to a valid extension. Make sure the person being trans- ferred to is registered on the system. If not, check to see whether the system is administered to allow transfers to non-registered numbers.

If the problem regards transferring to an operator, check to see if an operator has been defined on both the Voice and Fax System Parameter screens.

Check to see if the telephone line is properly connected to the channel.

Make sure a service has been assigned to the channel and that it is in the INSERV state. If it is in the facility-out-of-service (FOOS) state, run diagnostics to determine if it belongs out-of-service.

7-5

Page 158
Image 158
AT&T 2.1.1 manual Trouble Indication