memory module
securing clip
NOTICE: If you need to install memory modules in two connectors, install a memory module in the connector labeled "JDIM (DIMMA)" before you install a module in the connector labeled "JDIM2 (DIMMB)."
8Ground yourself and install the new memory module:
a Align the notch in the module with the slot in the center of the connector.
b Slide the edge of the module firmly into the connector, and rotate the module down until you hear a click. If you do not hear the click, remove the module and reinstall it.
HINT: If the memory module is not installed properly, the computer does not boot. No error message indicates this failure.
Re placing Par ts
83