Denon DVD-3800 manual 18

ENGLISH

BWhen “DELAY TIME” is selected

With 5.1-channel surround sound, ideally the distance between the listening position and all the speakers aside from the subwoofer should be the same. The delay time setting can be used to make the sound from the different speakers reach the listening position at the same time.

Use the • and ª cursor buttons to select the setting item, then press the ENTER button.

•When “DISTANCE” is selected:

METERS (when the 0cursor button is pressed): The unit of distance is set to meters (“m”). FEET (when the 1cursor button is pressed): The unit of distance is set to feet (“ft”).

•When “FRONT Lch”, “FRONT Rch”, “CENTER”, “SURROUND Lch”, ”SURROUND Rch”,

“SUBWOOFER” is selected:

3Use the 0 and 1 cursor buttons to set the distance from the listening position to the different speakers.

✽The distance can be set within the range of 0 to 60 feet (18 meters).

✽The maximum difference in speaker distance for which adjustment is possible is 15 feet (4.5 meters).

•When “DEFAULT” is selected:

When “DEFAULT” is selected and the ENTER button is pressed, all the items are restored to their factory default settings.

✽When digital connections are made with an AV amplifier, make the speaker settings on the AV amplifier.

For DVD audio discs, the disc’s settings are given priority, so the sound may not be produced as set with the above speaker mode setting.

✽Press the RETURN button to return to the “SPEAKER SETUP” menu.

					wWhen “DIGITAL OUT” is selected:
		ENTER			NORMAL (Factory default)			ENTER
					When playing DVDs recorded in Dolby Digital or DTS,
					bitstream signals are output from the digital audio output
					terminals. When playing DVDs recorded in linear PCM or
Remote control unit	Remote control unit				packed PCM, linear PCM signals are output.	Remote control unit		Remote control unit
					Select “NORMAL” when making digital connections to an
SP EAKE R SE TUP				B	AV amplifier with built-in Dolby Digital and DTS decoder.			B
	DE L AY T I ME				PCM
						AUD I O SE TUP
					When playing Dolby Digital/DTS bitstream signals or	AUD I O CHANNE L
	D I STANC E			ME T ERS		D I G I TAL	OUT	NORMAL
					DVDs recorded in linear PCM or packed PCM, the signals
						L PCM (4 4 . 1 kH z / 4 8 kH z )		PCM
	F RONT	L c h		3 . 6m
	F RONT	R c h		3 . 6m	are converted into 48 kHz/16-bit PCM (2-channel) signals	BASS ENHANCE R(2 CHANNEL)
	CENT ER			3 . 6m	and output from the digital outputs. When playing DVDs	DENON L I NK
	SURROUND		L c h	3 . 0m
					recorded in PCM, linear PCM signals are output.
	SURROUND		R c h	3 . 0m		E X I T SE TUP
	SUBWOOF ER			3 . 6m
	DE F AUL T			ON
SE L EC T :	DE C I S I ON : ENT E R BUT TON					SE L EC T :	DE C I S I ON : ENT E R BUT TON

eWhen “LPCM (44.1 kHz / 48 kHz)” is selected:

OFF (Factory default)

When playing linear PCM or packed PCM DVDs that are not

B

ENTER

copyright-protected, for 2-channel PCM audio signals up to

AUD I O SE TUP

96 kHz, linear PCM signals are output as such without being

AUD I O CHANNE L

converted from the digital outputs. (176.2 kHz and 192 kHz

D I G I TAL

OUT

signals are converted to 88.2 kHz and 96 kHz, respectively.)

L PCM (4 4 . 1 kH z / 4 8 kH z )

OF F

PCM signals of 48 kHz/16 bits and lower are output, regardless

BASS ENHANCE R(2 CHANNEL)

ON

Remote control unit

DENON L I NK

3

of whether they are copyright-protected or not.

For DVDs containing multi-channel PCM signals, the digital

E X I T SE TUP

SP EAKE R SE TUP

B

signals are down-mixed for output into two channels, front left

DE L AY T I ME

and right. (Only the front left and right channels are output for

SE L EC T :

DE C I S I ON : ENT E R BUT TON

D I STANC E

ME T ERS

sources for which down-mixing is prohibited.)

F RONT

L c h

3 . 6m

When playing copyright-protected linear PCM or packed

F RONT

R c h

3 . 6m

CENT ER

3 . 6m

PCM DVDs, in consideration of copyrights, no digital

SURROUND

L c h

3 . 0m

signals are output for sources exceeding 48 kHz/16 bits.

SURROUND

R c h

3 . 0m

When playing such sources, either set to “ON” or make

SUBWOOF ER

3 . 6m

analog connections. (See page 9.)

DE F AUL T

ON

SE L EC T :

DE C I S I ON : ENT E R BUT TON

ON

Linear PCM and packed PCM signals are converted to 44.1

kHz or 48 kHz and output. (The PCM digital audio output

signals are converted to 48 kHz or less in consideration of

SP EAKE R SE TUP

B

copyrights.) When making digital connections to an AV

DE L AY T I ME

amplifier that is not compatible with 96 kHz/88.2 kHz signals,

D I STANC E

ME T ERS

set to “ON”.

F RONT

L c h

3 . 6m

When playing DVDs recorded in linear PCM or packed

F RONT

R c h

3 . 6m

CENT ER

3 . 6m

PCM and the unit is set to output digital and analog audio

SURROUND

L c h

3 . 0m

signals simultaneously, the analog audio output signals

SURROUND

R c h

3 . 0m

are also converted to 48 kHz or below, so we recommend

SUBWOOF ER

3 . 6m

DE F AUL T

ON

setting to “OFF” and also making analog connections.

B

SE L EC T :

DE C I S I ON : ENT E R BUT TON

rWhen “BASS ENHANCER (2 CHANNEL)” is selected:

AUD I O SE TUP

AUD I O CHANNE L

OFF (Factory default)

D I G I TAL

OUT

L PCM (4 4 . 1 kH z / 4 8 kH z )

No sound is produced from the subwoofer.

BASS ENHANCE R(2 CHANNEL)

OF F

ON

DENON L I NK

ON

Sound is produced from the subwoofer.

E X I T SE TUP

In this case, set the subwoofer to “YES” at the speaker

settings.

SE L EC T :

DE C I S I ON : ENT E R BUT TON

✽To exit the setup mode

Use the ª cursor button to select “EXIT SETUP”, then press the ENTER button. It is also possible to quit by pressing the SETUP button on the remote control unit.

18