Denon DVD-3800 manual 7

(2)Connecting to a TV or Monitor Equipped with Color Component Input Connectors

Color component output connectors (PR/CR, PB/CB and Y)

The red (PR/CR), blue (PB/CB) and brightness (Y) signals are output independently, achieving more faithful reproduction of the colors.

• The color component input connectors may be marked differently on some TVs or monitors (PR, PB and Y/R-Y, B-Y and Y/CR, CB and Y, etc.). For details, refer to the TV’s operating instructions.

Connect in this way if your TV is compatible with Progressive Scan.

DVD-3800

COMPONENT

VIDEO OUT

AC IN

VIDEO OUT			Y	S-VIDEO OUT
						AV1
	1		PB/CB	1		REMOTE CONTROL
						RS-232C	ROOM TO ROOM
	2		PR/CR	2
							IN	OUT
SL	C	FL2	FL1	COAXIAL	OPTICAL	AV2
SR	SW	FR2	FR1	DIGITAL OUT

AUDIO OUT (PCM / BIT STREAM)

To power outlet

TV

Y PR/CR PB/CB	L	R
COMPONENT VIDEO IN	AUDIO IN

NOTES:

•Use the three commercially available video cords to connect the DVD-3800’s color component output connectors to the TV or monitor.

•Set the “TV TYPE“ in “VIDEO SETUP“ in “SETUP“ to comply with your TV's video format. When the TV is PAL formated, set to PAL. (See page 16.)

•Set the “VIDEO OUT” in “VIDEO SETUP” in “SETUP” to comply with Progressive TV. (NTSC formated only)

•To use with 2-channel audio output, set “2 CHANNEL” in “AUDIO CHANNEL” in “AUDIO SETUP” in “SETUP” at the initial settings. (See page 17)

•Set the “TV ASPECT” in “VIDEO SETUP” in “SETUP” to comply with your TV’s aspect. (See page 16)

CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE “STANDARD DEFINITION” OUTPUT.

ENGLISH

(3) Connecting to a TV with 21-pin SCART Terminal (For only European model)

•Use the commercially 21-pin SCART cable to connect the TV’s 21-pin SCART terminal to the DVD-3800’s 21- pin SCART terminal (AV1 / AV2).

21-pin SCART terminal

TV

To power outlet

DVD-3800
		COMPONENT
		VIDEO OUT
VIDEO OUT				S-VIDEO OUT		AC IN
			Y
					AV1
	1		PB/CB	1		REMOTE CONTROL
						RS-232CROOM TO ROOM
	2		PR/CR	2
						INOUT
SL	C	FL2	FL1	COAXIAL OPTICAL	AV2
SR	SW	FR2	FR1	DIGITAL OUT
		AUDIO OUT
				(PCM / BIT STREAM)
					NOTES:
• Some discs contain copy prohibit signals. If such						• Set the “TV TYPE“ in “VIDEO SETUP“ in
discs are played via a VCR, the copy prohibit						“SETUP“ to comply with your TV's video format.
system may cause disturbance in the picture.						When the TV is PAL formated, set to PAL. (See
						page 16.)

•To improve picture quality, you can change the video signal output from the AV1 terminal from “Video“ to either “S-Video“ or “RGB“ to suit the type of television you are using (See page 16).

•You can also connect other equipment to AV2.

		Satellite receiver
This unit	Video cassette recorder	or decoder
AV1	AV1	VCR
SCART terminal
of TV set
AV2	AV2

7