Rosemount 8732
Reference Manual
00809-0100-4663, Rev BA January 2010
| Index Number |
|
Parameter | Rev 5 | Description |
BLOCK_ALM | 36 | The block alarm is used for all configuration, hardware, connection failure, or |
|
| system problems in the block. The cause of the alert is entered in the subcode |
|
| field. The first alert to become active will set the active status in the status |
|
| parameter. As soon as the unreported status is cleared by the alert reporting task, |
|
| another block alert may be reported without clearing the active status, if the |
|
| subcode has changed. |
BLOCK_ERR | 06 | This parameter reflects the error status of the hardware or software components |
|
| associated with a block. It is a bit string, so multiple errors may be shown. |
CLR_FSAFE | 30 | Writing a Clear to this parameter will clear the device FAULT_ STATE if the field |
|
| condition has cleared. |
CONFIRM_TIME | 33 | This parameter represents the minimum time between retries of alert reports. |
CYCLE_SEL | 20 | This parameter is used to select the block execution method for this resource. The |
|
| Rosemount 8732 supports the following executions: |
|
| Scheduled: Blocks are only executed based on the schedule in FB_START_LIST. |
|
| Block Execution: A block may be executed by linking to another block’s completion. |
CYCLE_TYPE | 19 | This parameter identifies the block execution methods available for this resource. |
DD_RESOURCE | 09 | This string identifies the tag of the resource that contains the device description for |
|
| this resource. |
DD_REV | 13 | DD_REV is a revision of the DD associated with the |
|
| interface device to locate the DD file for the resource. |
DEFINE_WRITE_LOCK | 60 | This parameter is an enumerated value describing the implementation of the |
|
| WRITE_LOCK. |
DETAILED_STATUS | 55 | DETAILED_STATUS is an additional status bit string. |
DEV_REV | 12 | This parameter represents the manufacturer revision number associated with the |
|
| |
DEV_STRING | 43 | Used to load new licensing into the device. The value can be written but will always |
|
| read back with a value of 0. |
DEV_TYPE | 11 | This parameter represents the manufacturer’s model number associated with the |
|
| |
|
| (Rosemount 8732). |
DIAG_OPTION | 46 | Indicates which diagnostics licensing options are enabled. |
DISTRIBUTOR | 42 | References the company that is responsible for the distribution of this device. |
DOWNLOAD_MODE | 67 | DOWNLOAD_MODE gives access to the boot block code for |
|
| downloads. |
FAILED_ACTIVE | 72 | Active fail alarms. |
FAILED_ALM | 73 | Alarm indicating a failure within a device which makes the device |
FAILED_ENABLE | 70 | Enables or disables the failure conditions within a device. |
FAILED_MASK | 71 | Mask of Failure Alarm. Corresponds bit of bit to the Fail Active. A bit on means that |
|
| the failure is masked out from alarming. |
FAILED_PRI | 69 | Designates the alarming priority of the fail alarm. |
FAULT_STATE | 28 | Condition set by loss of communication to an output block, fault promoted to an |
|
| output block or physical contact. When FAULT_ STATE condition is set, then output |
|
| function blocks will perform their FAULT_ STATE actions. |
FB_OPTION | 45 | Indicates which function block licensing options are enabled. |
FEATURES | 17 | This parameter is used to show supported resource block options. |
FEATURE_SEL | 18 | Used to show selected resource block options. The Rosemount 8732 Magnetic |
|
| Flowmeter Transmitter supports the following options: |
|
| Unicode: Tells the host to use unicode for string values |
|
| Reports: Enables alarms; must be set for alarming to work |
|
| Software Lock: Software write locking enabled but not active; WRITE_LOCK must |
|
| be set to activate |
|
| Hardware Lock: Hardware write locking enabled but not active; WRITE_LOCK |
|
| follows the status of the security switch |
FINAL_ASSY_NUM | 54 | FINAL_ASSEMBLY_NUMBER is used for identification purposes and is associated |
|
| with the overall field device. |