Emerson Process Management 8732 Block Mode Target, Block Mode Actual, Block Mode Permitted, Auto

Rosemount 8732

Reference Manual

00809-0100-4663, Rev BA January 2010

Block Mode: Target

375 Transducer Block, Mode

Block Mode: Actual

375 Transducer Block, Mode

Block Mode: Permitted

375 Transducer Block, Mode

Block Mode: Normal

375 Transducer Block, Mode

Operator requested mode for the function block. Only one selection may be made. Options include:

Auto

Use this mode when all configuration changes to the block are complete and the transmitter is ready to be returned to service.

OOS

Out of service mode. Use this mode when making configuration changes to parameters found in the function block. This removes the transmitter from operation until the mode is set back to Auto.

This is the current mode of the function block. This mode may differ from the Target mode based on operating conditions.

This parameter defines which modes are available for a given function block.

Displays the mode that the function block should be set to for normal operation.

4-18