Emerson Process Management 8732 manual Rsstate

Rosemount 8732

Reference Manual

00809-0100-4663, Rev BA January 2010

	Index Number
Parameter	Rev 5	Description
RESTART	16	Allows a manual restart to be initiated. Several degrees of restart are possible:
		1 Run: Nominal state when not restarting
		2 Restart resource: Not used
		3 Restart with defaults: Set parameters to default values (see
		START_WITH_DEFAULTS below for which parameters are set).
		4 Restart processor: Does a warm start of the central processing unit (CPU).
RS_STATE	07	RS_STATE denotes the state of the function block application state machine.
SAVE_CONFIG_NOW	61	This parameter controls saving of configuration in EEPROM.
SAVE_CONFIG_BLOCKS	62	Number of EEPROM blocks that have been modified since the last burn. This value
		will count down to zero when the configuration is saved.
SECURITY_IO	65	SECURITY_JUMPER denotes the status of security jumper/switch.
SELF_TEST	59	SELF_TEST instructs the resource block to perform a self-test.
SET_FSAFE	29	Allows the FAULT_ STATE condition to be manually initiated by selecting Set.
SHED_RCAS	26	This parameter represents the time duration at which to give up on computer writes
		to function block RCas locations.
SHED_ROUT	27	This parameter represents the time duration at which to give up on computer writes
		to function block ROut locations.
SIMULATE_IO	64	SIMULATE_JUMPER shows the status of the simulate jumper/switch.
SIMULATE_STATE	66	SIMULATE_STATE represents the state of the simulate function.
ST_REV	01	The revision level of the static data associated with the function block. The revision
		value will be incremented each time a static parameter value in the block is
		changed.
START_WITH_DEFAULTS	63	START_WITH_DEFAULTS controls what defaults are used at power-up.
STRATEGY	03	The strategy field can be used to identify grouping of blocks. These data are not
		checked or processed by the block.
SUMMARY_STATUS	56	This parameter represents an enumerated value of repair analysis.
TAG_DESC	02	The user description of the intended application of the block.
TEST_RW	08	A parameter for a host to use to test reading and writing. Not used by the device at
		all.
UPDATE_EVT	35	This alert is generated by any change to the static data.
WRITE_ALM	40	This alert is generated if the write lock parameter is cleared.
WRITE_LOCK	34	If set, no writes from anywhere are allowed, except to clear WRITE_LOCK. Block
		inputs will continue to be updated.
WRITE_PRI	39	WRITE_PRI represents the priority of the alarm generated by clearing the write
		lock.
XD_OPTION	44	Indicates which transducer block licensing block options are enabled.

F-4