Emerson Process Management 8732 manual Connections and Hardware

Rosemount 8732

Reference Manual

00809-0100-4663, Rev BA January 2010

CONNECTIONS AND HARDWARE

Figure H-1. Rear Connection Panel

The 375 Field Communicator exchanges information with the transmitter from the control room, the instrument site, or any wiring termination point in the loop. Be sure to install the instruments in the loop in accordance with intrinsically safe or non-incendive field wiring practices. Explosions can result if connections to the serial port or NiCad recharger jack are made in an explosive situation. The Handheld Communicator should be connected in parallel with the transmitter. Use the loop connection ports on the rear panel of the Handheld Communicator (see Figure H-1). The connections are non-polarized.

IRDA Port

Fieldbus Connection Ports

375 Field Communicator Ports

Figure H-2. Connecting the

Handheld Communicator to a

Transmitter Loop

Power

Supply

H-2