EPSON AcuLaser C1100 Revision B
TROUBLESHOOTING FIP according to the printer message 146FIP-13
Panel Message
Wrong Toner Y
Possible parts that caused the error
Troubleshooting
Toner Cartridge Y PWBA MCU
HARNESS ASSY MAIN LV/HVPS
Step Check Yes No
1Model check of Toner Cartridge Y
Is a Toner Cartridge Y that complies with the
specifications attached?
Go to Step [2]. Replace with a
Toner Cartridge
Y that complies
with the
specifications.
2
Check after replacement of Toner Cartridge Y
Replace Toner Cartridge Y.
Does the error recur when the power is turned
ON?
Go to Step [3]. End of
procedure
3Power supply check to PWBA MCU
Are the following power voltages being
supplied to PWBA MCU from LV/HVPS?
J410-1J410-2: 3. 3 VDC
J410-3J410-4: 5 VDC
J410-5/6J410-7/8: 24 VDC
Replace PWBA
MCU. (p.404) Go to Step [4].
4
Continuity check of HARNESS ASSY MAIN
Disconnect P/J410 from PWBA MCU and P/
J502 from LV/HVPS.
Do all of the wiring below have normal
continuity?
J410-1J502-1
J410-2J502-2
J410-3J502-3
J410-4J502-4
J410-5J502-5
J410-6J502-6
J410-7J502-7
J410-8J502-8
Replace LV/
HVPS. (p.407) Repair broken
or shorted part.
Step Check Yes No