Epson SEPG04002 4.13.17 ROLL ASSY TURN 500

EPSON AcuLaser C1100 Revision B
DISASSEMBLY AND ASSEMBLY 500 PAPER CASSETTE & 500 PAPER FEEDER 463
4.13.17 ROLL ASSY TURN 500
REMOVAL
1. Remove CHUTE FDR ASSY 500. (p.454)
2. Remove COVER LEFT 500. (p.453)
3. Remove COVER RIGHT 500. (p.455)
4. Remove CLUTCH ASSY FEED. (p.461)
5. Remove DRIVE ASSY FEED. (p.458)
6. Remove HOUSING ASSY FEED. (p.476)
7. Remove CHUTE ASSY 500. (p.466)
8. Remove the E-rings fastening both sides of the shaft on ROLL ASSY TURN 500
from 500 PAPER FEEDER ASSY.
9. Remove the left and right BEARING FEEDs fastening ROLL ASSY TURN 500
from 500 PAPER FEEDER ASSY.
10. Temporarily slide ROLL ASSY TURN 500 to the left, and draw out the shaft of
ROLL ASSY TURN 500 from the right-side bearing on 500 PAPER FEEDER
ASSY to remove ROLL ASSY TURN 500.
REINSTALLATION
1. Insert the shaft left side on ROLL ASSY TURN 500 into the left-side bearing on
500 PAPER FEEDER ASSY, and slide ROLL ASSY TURN to the right to attach.
2. Match the double D cut surface of BEARING FEED with the left and right
bearings of 500 PAPER FEEDER ASSY, attach BEARING FEED, and fasten
ROLL ASSY TURN 500.
3. Fasten the shafts on both sides on ROLL ASSY TURN to 500 PAPER FEED ER
ASSY with the E-rings.
4. Attach CHUTE ASSY 500. (p.466)
5. Attach HOUSING ASSY FEED. (p.476)
6. Attach DRIVE ASSY FEED. (p.458)
7. Attach CLUTCH ASSY FEED. (p.461)
8. Attach COVER RIGHT 500. (p.455)
9. Attach COVER LEFT 500. (p.453)
10. Attach CHUTE FDR ASSY 500. (p.454)
Figure 4-163. Removal of ROLL ASSY TURN 500
Leg_Sec03_027EA
9)
10)
8)
8) 9)