EPSON AcuLaser C1100 Revision B
TROUBLESHOOTING Printing Quality-related Trouble 243
NOTE: When horizontal stripes and spots appear at fixed intervals, it is highly
possible that a specific roll has caused the trouble. If this happens, you
might be able to easily solve the problem by measuring the interval
between the stripes or spots on a test print, and checking the relationship
between the pitches shown in the table below (note that the pitch does not
necessarily match the length of the roll periphery).
Table 3-4. Trouble occurrence pitches
Pitch (mm) Roll Unit to be replaced
150. 41 Drum Photoconductor Unit
38. 40 BCR Photoconductor Unit
37. 52 1st BTR Photoconductor Unit
25. 73 • IBT Belt
• Cleaner Brush Photoconductor Unit
51. 05 2nd BTR 2ND BTR ASSY
82. 33 Heat Roll FUSER ASSY
94. 42 Pressure Roll FUSER ASSY
7. 54 PR Motor MOT ASSY P/R