Epson SEPG04002 4.3.7 HOLDER ASSY RETARD MSI

EPSON AcuLaser C1100 Revision B
DISASSEMBLY AND ASSEMBLY MSI 313
4.3.7 HOLDER ASSY RETARD MSI
REMOVAL
1. Remove FRAME ASSY-PH. (p.327)
2. Remove CHUTE MSI. (p.309)
3. Unhook the hooks of the PAPER GUIDEs on the lef t and right sides fastened to
SHAFT ASSY MSI, slide each PAPER GUIDE to the outside, and remove
CHUTE ASSY PAPER GUIDE.
4. Unhook the hooks of CORE on the left and right s i d es fastening SHAFT ASSY
MSI, and slide each to the outside.
5. Remove ROLL MSI. (p.308)
6. Remove HOLDER ASSY RETARD MSI from FRAME ASSY BOTTOM while
bending down the boss on both sides of HOLDER ASSY RETARD MSI.
Figure 4-31. Removal of HOLDER ASSY RETARD MSI (1)
C A U T IO N When performing the following work, take care not to lose SPRING
RETARD MSI.
Leg_Sec03_508EB
4)-1
3)-2
3)-1
4)-2
4)-2
4)-1
3)-1
3)-2