Epson SEPG04002 4.12.7 SOLENOID ASSY DUP

EPSON AcuLaser C1100 Revision B
DISASSEMBLY AND ASSEMBLY DUPLEX 419
4.12.7 SOLENOID ASSY DUP
REMOVAL
1. Remove DUPLEX ASSY. (p.412)
2. Remove COVER-R DUP. (p.413)
3. Remove COVER-L DUP. (p.414)
4. Remove LINK-LATCH and LINK-BUTTON. (p.416)
5. Open COVER UP-DUP TRANS, and remove INVERTER ASSY DUP. Note that
COVER LOW-DUP TRANS and COVER UP-DUP TRANS need not be
removed. (p.417)
6. Remove COVER-INV. (p.415)
7. Disconnect connector (P/J611) from SOLENOID ASSY DUP.
8. Remove the 2 screws (silver, 5mm) fasten i ng SOLENOID ASSY DUP to
INVERTER ASSY DUP.
9. Remove SOLENOID ASSY DUP from INVERTER ASSY DUP.
REINSTALLATION
1. Insert the pin on SOLENOID ASSY DUP into the hole on INVERTER ASSY
DUP, and attach SOLENOID ASSY DUP.
2. Remove the 2 screws (silver, 5mm) fasten i ng SOLENOID ASSY DUP to
INVERTER ASSY DUP.
Figure 4-122. Removal of SOLENOID ASSY DUP
C A U T IO N After connecting the connectors on SOLENOID ASSY DUP, make
sure that HARNESS-ASSY DUP1 is firmly hooked on the hook on
FRAME-INV.
Leg_Sec03_122FA
9)
7)
8)
8)