Epson SEPG04002 - page 368

EPSON AcuLaser C1100 Revision B
DISASSEMBLY AND ASSEMBLY XERO 368
8. Remove WIRE ASSY BTR, WIRE ASSY IBT and WIRE ASSY BCR from
GUIDE CRU ASSY AD.
9. Remove the screw (silver, with flange, tapping, 6 mm) fastening WIRE ASSY
DTN to GUIDE CRU ASSY AD.
10. Remove WIRE ASSY DTN from GUIDE CRU ASSY AD.
11. Remove SPRING-LATCH hooked onto the m ain unit and the stud of GUIDE
CRU ASSY AD.
12. Remove the screw (silver, with flange, tapping, 6 mm) fastening both PLATE-
ASSY GND and GUIDE CRU ASSY AD to the main unit, and remove PLATE-
ASSY GND.
Figure 4-79. Removal of GUIDE CRU ASSY AD (2)
13. Remove the 7 screws (silver, with flange, tapping, 6 mm) fastening GUIDE CRU
ASSY AD to the main unit.
14. Draw out the protrusion on GUIDE CRU ASSY AD from the hole on the main
unit, and remove GUIDE CRU ASSY AD.
Figure 4-80. Removal of GUIDE CRU ASSY AD (3)
Leg_Sec03_082EB
10)
8)
9)
11)
8)
8)
Leg_Sec03_083EB
14)
13) 13)
13)
13)
13)
13)13)
12)-2
12)-1