Epson SEPG04002 4.12.14 SWITCH-DUP DOOR

EPSON AcuLaser C1100 Revision B
DISASSEMBLY AND ASSEMBLY DUPLEX 430
4.12.14 SWITCH-DUP DOOR
REMOVAL
1. Remove DUPLEX ASSY. (p.412)
2. Remove the screw (silver, with flange, tapping, 10 mm) fastening COVER REAR
from DUPLEX ASSY.
3. Slide COVER REAR to the right, unhook the 2 hooks on the rear of COVER
REAR from DUPLEX ASSY, and remove COVER REAR.
4. Disconnect connector (P/J122) from SWITCH-DUP DOOR.
5. Open COVER UP-DUP TRANS.
6. Unhook the two hooks fastening SWITCH-DUP DOOR to DUPLEX ASSY, and
remove SWITCH-DUP DOOR.
REINSTALLATION
1. Open COVER UP-DUP TRANS.
2. Match the hook on SWITCH-DUP DOOR with the attachment position, and attach
to DUPLEX ASSY.
3. Connect connector (P/J122) to SWITCH-DUP DOOR.
4. Match the 2 hooks on the rear of COVER REAR with DUPLEX ASSY, and attach
COVER REAR.
5. Fasten COVER REAR to DUPLEX ASSY with the screw (silver, with flange,
tapping, 10 mm).
6. Attach DUPLEX ASSY. (p.412)
Figure 4-130. Removal of SWITCH-DUP DOOR
Leg_Sec03_130FA
6)-2
6)-1
4)
2) 3)
5)