EPSON AcuLaser C1100 Revision B
TROUBLESHOOTING Printing Quality-related Trouble 251
10 Check of image secondary transfer process
Is the toner image on IBT BELT transferred
normally to the paper?
Execute a test print, turn the power OFF when
you think that the image transfer process is in
progress during printing, and check the paper.
Go to Step [11] . Replace LV/
HVPS. (p.407)
11 Check of Heat Roll and Pressure Roll
Allow FUSER ASSY to cool down
before performing work.
Remove FUSER ASSY. (p.388)
Turn the Gear by hand, and inspect Heat Roll
and Pressure Roll.
Are Heat Roll and Pressure Roll scratched or
dirty and damaged?
Replace FUSER
ASSY. (p.388)
Replace “ESS
and possible
parts that caused
the error”.
Step Check Yes No
WARNING