EPSON AcuLaser C1100 Revision B
DISASSEMBLY AND ASSEMBLY DEVE 387
24. Remove the 2 screws (silver, with flange, 6 mm) fastening SHAFT ASSY-
ROTARY on the left side of the main unit.
25. Remove SHAFT ASSY-ROTARY from both sides of the main unit.
26. Remove FRAME ASSY-ROTARY upwards together with BEARING BALL.
27. Remove BEARING BALL from FRAME ASSY-ROTARY.
REINSTALLATION
1. Attach BEARING BALL to FRAME ASSY-ROTARY.
2. Match with the attachment position and attach so that the gear of FRAME ASSY-
ROTARY is at the left side.
3. Insert the shaft of SHAFT ASSY-ROTARY into the hole on FRAME ASSY-
ROTARY, and fasten FRAME ASSY-ROTARY to the main unit.
4. Fasten SHAFT ASSY-ROTARY on the left side of the main unit with the 2 screws
(silver, with flange, 6 mm).
5. Fasten SHAFT ASSY-ROTARY on the right side of the main unit with the 2
screws (silver, with flange, 6 mm).
6. Attach BRACKET ASSY 2ND GEAR and GEAR 2ND to the main unit.
7. Fasten BRACKET ASSY 2ND GEAR to the main unit with the 3 screws (silver,
with flange, 6 mm).
8. Attach HOUSING ASSY-DEVE. (p.383)
9. Attach GUIDE CRU ASSY AD. (p.367)
10. Attach GUIDE CRU ASSY D. (p.362)
11. Attach SENSOR TR-0. (p.361)
12. Attach BCR CLN XERO ASSY. (p.373)
13. Attach FRAME ASSY-PH. (p.327)
14. Remove SENSOR ROTARY HOME POSI. (p.382)
15. Attach LATCH ASSY-ROTARY. (p.378)
16. Attach MOT ASSY MAG. (p.396)
17. Attach DRIVE ASSY PRO. (p.394)
18. Attach CHASSIS ASSY ESS. (p.411)
19. Attach LV/HVPS. (p.407)
20. Attach PWBA MCU. (p.404)
21. Attach COVER INNER TOP. (p.299)
22. Attach COVER FRONT L and COVER FRONT ASSY U. (p.292)
23. Attach COVER MSI. (p.291)
24. Attach COVER ASSY LH. (p.295)
25. Attach 2ND BTR ASSY. (p.348)
26. Attach COVER ASSY TOP. (p.283)
27. Attach COVER ASSY RH. (p.301)
C A U T IO N When performing the following work, take care not to drop or lose
BEARING BALL.