EPSON AcuLaser C1100 Revision B
PRODUCT DESCRIPTION Printer Status 60
Manual Feed ssss
Explanation
Manual feed mode is specified for the current print job.
During printing in the manual feed mode, the paper ran out.
Remedy
Press the Start/Stop button. Printing starts feeding paper from the higher
priority feeder.
Cancel the job if there is no need to continue.
Can't Print Duplex
Explanation
The print job is not available for duplex printing.
With this printer, duplex printing is possible when the following conditions are all
met.
Page Size is any of A4, B5, LGL, LT, EXE
Paper type is plain paper, semi-thick paper, coated paper
Remedy
Press the Start/Stop button, the error is released, and simplex printing starts.
When “Auto Continue=On”, simplex printing starts after a certain interval.
Cancel the job if there is no need to continue.
Print Overrun
Explanation
While printing with a flying start, the data does not arrive in time.
Remedy
Press the Start/Stop button, the error is canceled, and the page is reprinted
without flying start.
When “Auto Continue=On”, the page is reprinted without flying-start after a
certain interval.
Cancel the job if there is no need to continue.
NOTE: If this error occurs frequently, set flying-start setting to Off on the printer
driver. (Avoid Page Error = On)
When “Mem Overflow” error occurs after recovering from the error, the
printer skips the error page and prints the next page.
In case of a receive time out (after recovering from the error), the printer
ejects a blank paper without indicating an error or warning.
Invalid Data
Explanation
A spool file in the driver is deleted while the printing is in progress. And then the
driver starts to process another job.
This error also occurs when the printer receives an abnormal data due to a
communication error.
When this error occurs, the job data which caused the error has been deleted.
There is a possibility that the next job data is recognized as a part of the previous
job data where the error occurs. In such case, first page is deleted.
Remedy
Press the Start/Stop button, the error is released.
When “Auto Continue=On”, the error is released after a certain interval.
Cancel the job if there is no need to continue.