EPSON AcuLaser C1100 Revision B

PRODUCT DESCRIPTION Status Sheet 67

1.19 Status Sheet
There are two kinds of status sheet, the Status Sheet (Simplified version) and the Status
Sheet.
Status Sheet (Simplified version):
This can be printed using the printer operation panel. And also a Status Sheet on
which has no setting information printed by the printer driver is called “Simplified
version”. The characters are printed in accordance with the display language
setting in black and white only.
Status Sheet (Full version):
Printing this sheet is executed from the printer driver and the printer setting
information can be acquired.
Status Sheet is shown in Figure 1-15 (p.68) and Figure 1-16 (p.69).
INFORMATION AT THE BOTTOM
1. Firmware version in DDYM format beginning with IA
2. Code ROM device type.
*: Flash
space : Mask
3. 4-digit CMTD (Color Matching Table Data) version be ginning with A
4. Version of mechanical controller of the engine indicated by 10 figures beginning with
“MC”
5. Space
6. USB ID (31PXXXXXXXXXXXXXXX)
7. Latest connection status of the USB communication mode
H: HS
F: FS
space : No USB connection
8. USB communication mode
D : D4 compliant device connected
space : non D4 compliant device
9. Space (Type-B level)
10. IEEE1284 negotiation result
e: ECP
n: Nibble
space : Co m patibility
11. Number of occurrences of jams indicated by JC and 6 figures
12. Number of replacements of Toner Cartridge indicated by IC and 12 figures, and
number of recoveries from errors (Toner Cartridge) indicated by 12 figures.
Maximum number of times: 255
There is a space between the number of replacements and the number of error
recoveries.
Both numbers are indicated in order of C, M, Y, K with 3 figures for each.
INFORMATION ON OPTIONS INSTALLED
1. RAM DIMM : Total amount of memory including the standard
RAM is indicated as “Installed Memory”.
2. Network interface board : Network menu and its setting items are indicated.
“Network” is added to the “Installed Interface”.
NOTE: LAN HW Address, LAN HW Revision, LAN FW Revision are added to
Hardware Configuration
LAN HW Address is the MAC address
LAN HW Revision is always 0
The LAN FW Revision is network software version.
3. Optional paper cassette unit
4. Duplex unit
t
Status Sheet (Simple version) Status sheet (Full version)
LC is added to the “Input Unit” under the
“Hardware Configuration”. LC is added to the “Input Tray” under
the “Hardware Configuration”.
Status Sheet (Simple version) Status sheet (Full version)
Duplex is added to the “Input Unit”
under the “Hardware Configuration”. Duplex is added to the “Input Tray”
under the “Hardware Configuration”.