Safety Information
To prevent accidents during a maintenance procedure, strictly observe the Warnings and Cautions and never depart from the instructions given in this document.
Do not do anything that is dangerous even if not specifically described in this manual.
In addition to the descriptions below and those given in this manual, there are many situations and circumstances that could result in serious bodily injury.
Always pay enough attention to secure safety when working with the printer.

Power Supply

Before starting any service procedure, turn the printer off power and unplug the power
cord from the wall outlet. When the power supply cable must be connected, be aware
of the potential for electrical shock and do all tasks by following the procedures in this
manual.

Mechanical Components

When servicing any driving assembly (e.g., gears), first turn the power off and unplug
the power cord. Then manually rotate the assembly.
WARNING
Do not touch any live part unless instructed to do so. The power
supply switch/inlet part (MAIN POWER SWITCH & INLET) is
live even when the power switch has been turned off.
Leg_Sec001_002EA
WARNING
Do not touch the driving part (e.g., gears) while the assembly
(printer) is operating.