Epson SEPG04002 4.12.27 ROLLER ASSY DUP OUT

EPSON AcuLaser C1100 Revision B
DISASSEMBLY AND ASSEMBLY DUPLEX 445
4.12.27 ROLLER ASSY DUP OUT
REMOVAL
1. Remove DUPLEX ASSY. (p.412)
2. Remove COVER-R DUP. (p.413)
3. Remove COVER-L DUP. (p.414)
4. Remove COVER LOW-DUP TRANS. (p.436)
5. Remove COVER UP-DUP TRANS. (p.437)
6. Remove the E-ring fastening ROLLER ASSY DUP OUT to DUPLEX ASSY.
7. Remove GEAR 30 OW from the left side of ROLLER ASSY DUP OUT.
8. Remove the left and right BEARING DUP fastening ROLLER ASSY DUP OUT
from DUPLEX ASSY.
9. Temporarily slide ROLLER ASSY DUP OUT to the left, and draw out the shaft of
ROLLER ASSY DUP OUT from the right-side bearing of DUPLEX ASSY to
remove ROLLER ASSY DUP OUT.
REINSTALLATION
1. Insert the shaft left side on ROLLER ASSY DUP OUT into the left-side bearing
on DUPLEX ASSY, and slide ROLLER ASSY DUP OUT to the right to attach.
2. Match the double D cut surface of BEARING DUP with the left and right bearings
of DUPLEX ASSY, attach BEARING DUP, and fasten ROLLER ASSY DUP
OUT.
3. Attach GEAR 30 OW to the left side of ROLLER ASSY DUP OUT with the
flange of GEAR 30 OW facing the outside.
4. Fasten the left and right sides of ROLLER ASSY DUP OUT to DUPLEX ASSY
with the E-rings.
5. Attach COVER UP-DUP TRANS. (p.437)
6. Attach COVER LOW-DUP TRANS. (p.436)
7. Attach COVER-L DUP. (p.414)
8. Attach COVER-R DUP. (p.413)
9. Attach DUPLEX ASSY. (p.412)
Figure 4-145. Removal of ROLLER ASSY DUP OUT
C A U T IO N When performing the following work, pay attention to the
attachment direction of GEAR 30 OW. Leg_Sec03_141FA
NOTE
9)
6)
6)
7)
8)
8)