EPSON AcuLaser C1100 Revision B
DISASSEMBLY AND ASSEMBLY MSI 314
REINSTALLATION
1. Match SPRING RETARD MSI attached to HOLDER ASSY RETARD MSI with
the spring bearing of FRAME ASSY BOTTOM, and attach the bosses on both
sides of HOLDER ASSY RETARD MSI to FRAME ASSY BOTTOM while
bending down the bosses.
2. Attach ROLL MSI. (p.308)
3. Slide each of the left- and right-side COREs to the inside, and fasten the CORE
hook to the groove on SHAFT ASSY MSI.
4. Slide each of the PAPER GUIDEs on the left and right sides to inside, attach
CHUTE ASSY PAPER GUIDE, and fasten the hooks on the PAPER GUIDEs to
the grooves on the SHAFT ASSY MSI.
5. Attach CHUTE MSI. (p.309)
6. Attach FRAME ASSY-PH. (p.327)
Figure 4-32. Removal of HOLDER ASSY RETARD MSI (2)
C A U T IO N When SPRING RETARD MSI has come off from HOLDER ASSY
RETARD MSI, attach SPRING RETARD MSI to the boss on
HOLDER ASSY RETARD MSI, and then perform the following
work.
C A U T IO N SPRING RETARD MSI must be properly matched with the boss on
the spring bearing of FRAME ASSY BOTTOM.
C A U T IO N Make sure to install the FRAME ASSY-PH correctly by referring
the caution described in the “REINSTALLATION” of the “4.4.4
FRAME ASSY-PH” (p.327).
Leg_Sec03_048EB
CAUTION
6)