EPSON AcuLaser C1100 Revision B

TROUBLESHOOTING FIP according to the printer message 240

FIP-C2
Panel Message
Possible parts that caused the error
Troubleshooting
FIP-C3
Panel Message
Possible parts that caused the error
Troubleshooting

Service Req C0999 Service Req C1121

Service Req C1002 Service Req C1122

Service Req C1010 Service Req C1123

Service Req C1120

PWBA ESS Standard ROM-DIMM

Step Check Yes No
1Check of Standard ROM-DIMM
1. Check whether the installed ROM-DIMM
is the specified one and is securely
connected. (Remove it once and reinstall it
again.)
Does the error occur?
To Step [2] End of
procedure
2Replace the Standard ROM-DIMM
1. Replace the Standard ROM-DIMM.
Does the error occur?
To Step [3] End of
procedure
3External noise
1. Check the surrounding of the printer for
electrical equipment.
2. Disconnect all cables connected to the
printer, except the AC cable, and make
operation check.
Does the error occur?
Replace the
PWBA ESS.
(p.409)
End of
procedure

Service Req C1020 Service Req C1021

PWBA ESS RAM-DIMM

Step Check Yes No
1Check of RAM-DIMM
Check whether the installed RAM-DIMM is
the specified one and is securely connected.
(Remove it once and reinstall it again.)
Does the error occur?
To Step [2] End of
procedure
2Replace the RAM-DIMM
1. Replace the Standard RAM-DIMM.
Does the error occur?
To Step [3] End of
procedure
3External noise
1. Check the surrounding of the printer for
electrical equipment.
2. Disconnect all cables connected to the
printer, except the AC cable, and make
operation check.
Does the error occur?
Replace the
PWBA ESS.
(p.409)
End of
procedure