EPSON AcuLaser C1100 Revision B
PRODUCT DESCRIPTION Printer Status 62
1.16.4 Warning Messages and Troubleshooting
The following are items specific to this printer.
Worn Fuser
Explanation
The FUSER ASSY comes to near end of its life.
The print quality is not guaranteed from now on.
Remedy
1. Turn off the power and replace the fuser unit with a new one.
2. Turn the printer on in maintenance menu (or reset menu), and clear the lifetime
counter of the FUSER ASSY.
NOTE: Although continuing to use the FUSER ASSY is possible for a while, it is
recommended to replace the assy with a new one when this warning is
indicated. After the warning jamming at the assy may occur frequently
because the roller does not rotate smoothly due to wear of its bearings.
NonGenuine Toner
Explanation
A non-genuine toner cartridge is installed.
Remedy
The warning message is released by one of the following methods.
Replacing with genuine toner cartridge.
Executing Clear All Warnings*.
Executing Reset in the Reset menu*.
Note *: Even if the warning is once cleared by the above operation, the same warning will be
displayed agein as long as the same toner cartridge remains unchan ged in the printer.
Worn uuuu Dev Unit
Explanation
The HOUSING ASSY-DEVE of each color (C, M, Y, K) reaches the almost end
of its life (the rest of the life is about 1000 pages) It is still able to use, however, it
is recommended to replace it with a new one.
Worn Photoconductor
Explanation
The Photoconductor Unit reaches the almost end of its life (about 95% used). It is
calculated by engine. After recovering from the error, “Replace Photocondctr”
error (LED flashes) will be displayed.