EPSON AcuLaser C1100 Revision B
PRODUCT DESCRIPTION Control Panel 49
1.15.2 Panel Settings List

The printer settings are listed below.

Underlined value in the Setting value column are factory default settings.

Information Menu

Note *1: Only displayed when the network interface board is installed, and “Network Menu” -
“Network I/F=On”.
*2: Only displayed when a D4-compliant USB external device is connected, and “USB
Menu” - “USB I/F=On”.
*3: This item is for display only and cannot be modified.

Status Menu

This menu is displayed only when a warning occurs.

Tray Menu

Note *1: The default value depends on the controller configuration settings.
(For details, refer to “Controller Configuration” (p.46).)
*2: Selectable when the lower feed unit is installed.
*3: Always A4 by default, irrespective of the controller configuration.

Printing Menu

Note *1: This item exists as the parameter, but not displayed on the panel.
*2: Paper size specified by ESCPAGE-S03 command is not differ among the each
destination, both size are available.
*3: The default value depends on the controller configuration settings.
Setting Setting values Status sheet
Status Sheet --- ---
Network Status Sheet*1--- ---
USB Extl/FstatusSht*2--- ---
C Toner*3EF to E******F {
M Toner*3EF to E******F {
Y Toner*3EF to E******F {
K Toner*3EF to E******F {
Photocondctr*3EF to E******F {
Total Pages*30 to 99999999 {
Color Pages*30 to 99999999 {
B/W Pages*30 to 99999999 {
Setting Setting values Status sheet
MP Tray Size*1A4, A5, B5, LT, HLT, GLT, EXE, MON, C10,
DL, C5, C6, IB5 {
LC Size*2*3A4, LT, {
MP Type*2*3Plain, SemiThk, Letterhead, Recycled, Color,
Trnsprncy, Labels {
LC Type*2Plain, SemiThk, Letterhead, Recycled, Color {
Setting Setting values Status sheet
Page Size*1*2*3A4, A5, B5, LT, HLT, GLT, EXE, MON, C10,
DL, C5, C6, IB5 ---
Orientation*1Port, Land ---
Resolution*1300, 600 ---
RITech*1On, Off ---
Toner Save*1On, Off ---
Page Scale Off, 80% ---
Image Correct*11, 2 ---
Top Offset*1-30.0 to 0.0 to 30.0mm ---
LeftOffset*1-30.0 to 0.0 to 30.0mm ---
T Offset B*1-30.0 to 0.0 to 30.0mm ---
L Offset B*1-30.0 to 0.0 to 30.0mm ---