EPSON AcuLaser C1100 Revision B

PRODUCT DESCRIPTION Control Panel 54

1.15.3 Explanation of Menu and Settings
The following are items specific to this printer.
Reset menu
Change Toner C/Change Toner M/Change Toner Y /Change Toner K
Used when replacing a Toner Cartridge before toner end occurs.
When executed, “Please Wait” is displayed, and when the specified toner reaches
the replacement position, “Replace Toner x” is displayed and the printer stands by.
If the cartridge is not actually replaced, the operation finishes when cover A is
closed.
Reset Fuser Counter
Reset the counter of the fuser assy consumption and count up the exchange
counter.
When resetting the counter, the number of printed pages for the Fuser Assy is
stored on the EEPROM. The stored value will be printed on the Engine Status
Sheet as the number of previous replacement.
This is same for the Reset Fuser Counter of maintenance menu.
Printer Adjust Menu
Calibration
Execute the process control. Since the process control is a cycle down process
control, it is conducted when printing is fin ished.
Maintenance Menu
MCU DATA BackUp*1
Backup the data of the engine. "MCU Data BackUp" is displayed until back up
processing ends.
MCU DATA Restore*1
Restore the data of the engine to the mechanical controller. "MCU DATA
Restore" is displayed until restore processing ends.
NOTE *1:
Execution of the mechanical controller backup/restore is not possible in the
following states:
•
During a power save
•
During warming-up
•
During printing
•
During printer adjustments
The power must not be turned OFF during the backup pr ocess until the
engine has stopped.
Print Log Report
Prints a log of printing status.
Reset 2ndBTRCounter
Reset the counter of the 2nd BTR assy consumption and count up the exchange
counter. After executing the counter reset, open and close the A cover. Do not turn
the printer off until the engine stops completely.
Reset C/M/Y/K DvlpCounter
Reset the counter of the developer unit (HOUSING ASSY-DEVE) consumption
and count up the exchange counter. After executing the counter reset, open and
close the A cover. Do not turn the printer off until the engine stops completely.