Epson SEPG04002 5.1 Overview

EPSON AcuLaser C1100 Revision B
ADJUSTMENT Overview 486
5.1 Overview
This chapter explains the adjustment necessary to maintain the functions and performance of the AcuLaser C1100.
5.1.1 Instructions
Before starting your adjustment work, always check the CAUTION on the right.
5.1.2 Part/unit-based adjustment items
The following table indicates the adjustment items and life counter clear items necessary when the specific unit is replaced or removed.
C A U T IO N Refer to “ 5.1.2 Part/unit-based adjustment items ” (p.486), always confirm the adjustment items and the orders for the replaced/removed parts and
units in advance.
Start adjustment after fully checking the Caution given in the explanation area of each adjustment item. Incorrect work may interfere with the
product operations and/or functions.
Table 5-1. Adjustment Item List
Repaired Part Adjustment Item Execution Timing Adjustment Execution Means Reference
FUSER ASSY Life counter clear After replacement with a new one Execute by the operation panel
(Maintenance Menu [Reset Fuser Counter]) p.497
2ND BTR ASSY Life counter clear After replacement with a new one Execute by the operation panel
(Maintenance Menu [Reset 2ndBTRCounter]) p.497
HOUSING ASSY-DEVE Life counter clear After replacement with a new one Execute by the operation panel
(Maintenance Menu [Reset X DvopCounter]) p.497
BOARD ASSY., MAIN Writing USB ID After replacement with a new one Execute by the dedicated program p.487
—Controller Firmware Update —Start the printer by performing special operation [Program ROM
update], and send the firmware data from the PC. p.489
—MCU Firmware Update —Start the printer by performing special operation [Engine program
update], and send the firmware data from the PC. p.490