Epson SEPG04002 7.2 Wiring Connection Diagrams

EPSON AcuLaser C1100 Revision B
APPENDIX Wiring Connection Diagrams 517
7.2 Wiring Connection Diagrams
7.2.1 Marks used in the Overall Wiring Connection Diagram
The table below shows how to interpret the Overall Wiring Connection Diagrams.
Table 7-4. List of the Marks
Name of signal line Remarks
Indicates a connection between parts by harness, wire, etc.
Indicates a connection that differs according to the specification.
Indicates a connection between parts by conductive materials
such as a leaf spring.
Indicates a connection between parts by tightening of screws.
Indicates Frame Ground.
Indicates a connector, and the connector No.
Indicates a connection terminal with an on-board leaf spring,
etc., and the connector (terminal) No.
Indicates a connector attached directly to the board, and the
connector No.
Box with a part name in it indicates the part.
Indicates a functional component in a part, and its name.
Indicates a section in “7.3 Wiring Connection Diagram
between Parts” (p519), and the section No.
Indicates the screw for fastening conductive materials such as
leaf springs to harnesses.
Indicates conductive materials such as leaf spring.
Table 7-4. List of the Marks
Name of signal line Remarks