Freescale Semiconductor Table 2-2 lists the MCF548x signals in pin number order for the 388 PBGA package.

MCF548x Reference Manual, Rev. 3
2-10 Freescale Semiconductor
Table 2-2 lists the MCF548x signals in pin number order for the 388 PBGA package.
AD164USB_PLLVDD — — — USB PLL supply
AE184USBVDD — — — USB supply
1Pull-up resistor when configured for general purpose input (default state after reset).
2This pin is a “no connect” on the MCF5483 and MCF5482 devices.
3This pin is a “no connect” on the MCF5481 and MCF5480 devices.
4This pin is a “no connect” on the MCF5481 and MCF5480 devices. On MCF5485, MCF5484, MCF5483, and MCF5482 device the pin
should be connected to the appriopriate power rail even is USB is not being used.
Table 2-2. MCF5485/MCF5484 Signal Description by Pin Number
PBGA Pin
Pin Functions
PBGA Pin
Pin Functions
Primary GPIO Secondary Tertiary Primary GPIO Secondary Tertiary
A1 SDVDD — — — P1 SDCS1 ———
A2 VSS — — — P2 SDCS2 ———
A3 SDDM2 —— — P3 SDVDD — — —
A4 SDDATA23 ———P4IVDD — — —
A5 SDDATA24 —— — P11 VSS — — —
A6 SDDATA27 —— — P12 VSS — — —
A7 SDDQS3 —— — P13 VSS — — —
A8 SDDATA29 —— — P14 VSS — — —
A9 SDADDR0 —— — P15 VSS — — —
A10 SDADDR3 —— — P16 VSS — — —
A11 SDADDR7 —— — P23 PCIAD19 — FBADDR19 —
A12 SDADDR11 —— — P24 PCIAD20 — FBADDR20 —
A13 SDADDR12 —— — P25 PCIAD18 — FBADDR18 —
A14 IRQ5 PIRQ5 CANRX1 — P26 PCIAD21 — FBADDR21 —
A15 DSI — TDI — R1 FBCS5 PFBCS5 — —
A16 TCK — — — R2 SDCS3 ———
A17 CLKIN — — — R3 EVDD — — —
A18 MTMOD1 — — — R4 VSS — — —
A19 PLLVDD — — — R11 VSS — — —
A20 RSTO — — — R12 VSS — — —
Table 2-1. MCF548x Signal Description (Continued)
PBGA Pin
Pin Functions
Description I/O
Pull-up
Drive
Reset State
Primary GPIO Secondary Tertiary