“C” Group: IntelligentTerminal Functions
Output Function Summary Table
Option | Terminal | Function Name |
| Description |
Code | Symbol |
| ||
|
|
| ||
|
|
|
|
|
|
|
|
|
|
09 | LOG | Logic Output | ON | when the Boolean operation specified by C143 |
|
| Function |
| has a logical “1” result |
|
|
|
|
|
|
|
| OFF | when the Boolean operation specified by C143 |
|
|
|
| has a logical “0” result |
|
|
|
|
|
Analog Function Summary Table – This table shows both functions for the analog voltage output [AM] terminal, configured by C028. More information on using and calibrating the [AM] output terminal is in “Analog Output Operation” on page
Analog Function Summary Table
Option | Function Name | Description | Range | |
Code | ||||
|
|
| ||
|
|
|
| |
|
|
|
| |
00 | Analog Frequency | Actual motor speed | 0 to max. | |
| Monitor |
| frequency in Hz | |
|
|
|
| |
01 | Analog Current Output | Motor current (% of maximum rated | 0 to 200% | |
| Monitor | output current) |
| |
|
|
|
|
Output Function Adjustment Parameters
The following parameters work in conjunction with the intelligent output function, when configured. The overload level parameter (C041) sets the motor current level at which the overload signal [OL] turns ON. The range of settings is from 0% to 200% of the rated current for the inverter. This function is for generating an early warning logic output, without causing either a trip event or a restriction of the motor current (those effects are available on other functions).
Motor current
C041
0
t
Overload signal 1
0
t
The frequency arrival signal, [FA1] or [FA2], is intended to indicate when the inverter output has reached (arrived at) the target frequency. You can adjust the timing of the leading and trailing edges of the
Output
frequency
C042 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| C043 |
| ||
0 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| t | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||
signal via two parameters specific to acceleration and deceleration ramps, C042 and C043.
Arrival signal
1
0
t