Hitachi SJ200 Series manual 87

3–15

SJ200 Inverter

The jog speed setting is used whenever the Jog command is active. The jog speed setting range is arbitrarily limited to 10 Hz, to provide safety during manual operation. The acceleration to the jog frequency is instantaneous, but you can choose from three modes for the best method for stopping the jog operation.

		“A” Function			Run		Defaults
Func.	Name /			Description	Mode	–FEF	–FU	Units
					Edit
Code	SRW Display					(EU)	(USA)
A020	Multi-speed frequency		Defines the first speed of a		✔	0.0	0.0	Hz
	setting		multi-speed profile, range is
			0.0 / start frequency to 400 Hz
	SPD 00s 0000.0Hz
			A020	= Speed 0 (1st motor)
A220	Multi-speed frequency		Defines the first speed of a		✔	0.0	0.0	Hz
	setting, 2nd motor		multi-speed profile for 2nd
			motor, range is 0.0 / start
	2SPD00s 0000.0Hz
			frequency to 400 Hz
			A220	= Speed 0 (2nd motor)
A021	Multi-speed frequency		Defines 15 more speeds,		✔	see	see	Hz
to	settings		range is 0.0 / start frequency			next	next
A035	(for both motors)		to 400 Hz.			row	row
			A021= Speed 1...						Configuring ParametersDrive
			A035	= Speed 15
	SPD 01s	000.0Hz	A021			0.0	0.0
	SPD 02s	000.0Hz	A022			0.0	0.0
	SPD 03s	000.0Hz	A023			0.0	0.0
	SPD 04s	000.0Hz	A024			0.0	0.0
	SPD 05s	000.0Hz	A025			0.0	0.0
	SPD 06s	000.0Hz	A026			0.0	0.0
	SPD 07s	000.0Hz	A027			0.0	0.0
	SPD 08s	000.0Hz	A028			0.0	0.0
	SPD 09s	000.0Hz	A029			0.0	0.0
	SPD 10s	000.0Hz	A030			0.0	0.0
	SPD 11s	000.0Hz	A031			0.0	0.0
	SPD 12s	000.0Hz	A032			0.0	0.0
	SPD 13s	000.0Hz	A033			0.0	0.0
	SPD 14s	000.0Hz	A034			0.0	0.0
	SPD 15s	000.0Hz	A035			0.0	0.0
A038	Jog frequency setting		Defines limited speed for jog,		✔	1.00	1.00	Hz
			range is 0.00 / start frequency
	Jog-F	001.00Hz
			to 9.99 Hz
A039	Jog stop mode		Define how end of jog stops		✘	00	00	—
			the motor; three options:
	Jog-Mode	FRS
			00... Free-run stop
			01... Controlled deceleration
			02... DC braking to stop