Hitachi SJ200 Series manual 250

B–36

ModBus Data Listing

The following table lists the holding registers for the “C” Group Intelligent Input

Functions.I

		“C” Group Intelligent Terminal Functions
	Func.	Name	R/W	Description	Network Data
	Code				Reg.	Range	Res.
	C001	Terminal [1] function	R/W		00A7h	0, 1, 2, 3,	—
						4, 5, 6, 7,
	C002	Terminal [2] function	R/W		00A8h
						8, 9, 11,
	C003	Terminal [3] function	R/W		00A9h	12, 13,
						15, 16,
	C004	Terminal [4] function	R/W	See “Input Terminal Config-	00AAh
B						18, 19,
Appendix	C005	Terminal [5] function	R/W	uration” on page 3–41	00ABh	20, 21,
						22, 23,
	C006	Terminal [6] function	R/W		00ACh
						24, 27,
						28, 29,
						31, 50,
						51, 255
	C011	Terminal [1] active state	R/W	Select logic convention, two	00ADh	0, 1	—
				option codes:
	C012	Terminal [2] active state	R/W		00AEh	0, 1	—
				00... normally open [NO]
	C013	Terminal [3] active state	R/W	01... normally closed [NC]	00AFh	0, 1	—
	C014	Terminal [4] active state	R/W		00B0h	0, 1	—
	C015	Terminal [5] active state	R/W		00B1h	0, 1	—
	C016	Terminal [6] active state	R/W		00B2h	0, 1	—
	C021	Terminal [11] function	R/W	See “Output Terminal	00B3h		—
						0, 1, 2, 3,
	C022	Terminal [12] function	R/W		00B4h
				Configuration” on page 3–		4, 5, 6, 7,
	C026	Alarm relay terminal	R/W	46	00B5h	8, 9
		function
	C028	[AM] signal selection	R/W	Two available functions:	00B7h	0, 1	—
				00... Actual motor speed
				01... Motor current
	C031	Terminal [11] active	R/W	Select logic convention, two	00B8h	0, 1	—
		state		option codes:
				00... normally open (NO)
				01... normally closed (NC)
	C032	Terminal [12] active	R/W	Select logic convention, two	00B9h	0, 1	—
		state		option codes:
				00... normally open (NO)
				01... normally closed (NC)
	C036	Alarm relay active state	R/W	Select logic convention, two	00BAh	0, 1	—
				option codes:
				00... normally open (NO)
				01... normally closed (NC)