Hitachi SJ200 Series manual 30

		SJ200 Inverter	1–11
	Item	General Specifications
				Getting
Other functions		AVR function, curved accel/decel profile, upper and lower limiters,
		16-stage speed profile, fine adjustment of start frequency, carrier
		frequency change (2 to 14 kHz), frequency jump, gain and bias
		setting, process jogging, electronic thermal level adjustment, retry		Started
		function, trip history monitor, 2nd setting selection, fan ON/OFF
		selection
Protective function		Over-current, over-voltage, under-voltage, overload, extreme high/
		low temperature, CPU error, memory error, ground fault detection at
		startup, internal communication error, electronic thermal
Operat-	Temperature	Operating (ambient): -10 to 40°C (*10) / Storage: -25 to 70°C (*11)
ing
	Humidity	20 to 90% humidity (non-condensing)
Environ
ment	Vibration *12	5.9 m/s2 (0.6G), 10 to 55 Hz
	Location	Altitude 1,000 m or less, indoors (no corrosive gasses or dust)
Coating color		Munsell 8.5YR6.2/0/2
Options		Remote operator unit, copy unit, cables for the units, braking unit,
		braking resistor, AC reactor, DC reactor, noise filter, DIN rail
		mounting

Signal Ratings

Detailed ratings are in “Control Logic Signal Specifications” on page 4–6.

Signal / Contact	Ratings
Built-in power for inputs	24VDC, 30 mA maximum
Discrete logic inputs	27VDC maximum
Discrete logic outputs	50mA maximum ON state current, 27 VDC maximum OFF state voltage
Analog output	0 to 10VDC, 1 mA
Analog input, current	4 to 19.6 mA range, 20 mA nominal
Analog input, voltage	0 to 9.6 VDC range, 10VDC nominal, input impedance 10 kΩ
+10V analog reference	10VDC nominal, 10 mA maximum
Alarm relay contacts	250 VAC, 2.5A (R load) max., 0.2A (I load, P.F.=0.4) max.
	100 VAC, 10mA min.
	30 VDC, 3.0A (R load) max., 0.7A (I load, P.F.=0.4) max.
	5 VDC, 100mA min.