Terminal Emulation Menu Screens | SECTION 3 |
Selecting More moves you to select the telnet option for the VT/ANSI data stream.
VT/ANSI
1)Telnet
2)Term Setup
3)Send XON
4)Keypad Mode
5)Cursor Mode
6)Terminal Mode
1)Telnet allows for the handling of telnet option negoti- ations to establish a session with an appropriate telnet server. This can not be changed if you are using 6400 TCP/ IP.
Make your selection, then press the [ENT] key to return to the Protocol Opts menu.
Term Setup
1)ANSI
2)VT100
3)VT220
4)VT320
5)VT350
2)Terminal Setup allows you to select compliance level of the terminal being emulated. Default is VT340 to support all commands.
3)Send XON, default is enabled. Enabled indicates that whenever an RIS is received from the host the XON charac- ter is returned back after compliance of this command.
