SECTION 3 | Terminal Emulation Menu Screens |
Keyboard Test
The Keyboard Test lets you test each key on the
Keyboard Test
Press A Key
ENTER To Exit
Key = ’A’
To perform this test, press each key on the keyboard (except the [ENT] key). A character corresponding to the key pressed should appear on the display.
Scanner Test
The Scanner Test allows you to test the operation of an attached bar code scanner. From the Scanner Test menu, scan an enabled bar code. For this test to pass the bar code and the bar code length should appear on the display. Press any key to exit.
The Scanner Test screen is shown below.
Scanner Test
Scan Code>
Length>
6400
